Start with the site visit and measurements
A construction estimate starts with a clear understanding of the job. Ask the customer what they want done, which areas are included, and whether there are decisions still to be made. Visit the site when practical, bring the relevant plans, and compare them with the conditions you can actually see. Record measurements with their units and identify the rooms or surfaces they refer to.
Check access for workers and deliveries, the condition of existing surfaces, and any restrictions on working hours. Ask who will clear the work area and whether utilities will be available. If part of the site is concealed or inaccessible, note that limitation instead of assuming what is behind it. Explain how you will address a change if the condition turns out to be different.
Before pricing, repeat the proposed scope back to the customer. A shared description of the work gives you a useful basis for quantities and helps the customer understand what the estimate covers. Record choices that are still open, such as the finish or the party responsible for purchasing fixtures.
Break out labor, materials and services
Break the job into descriptions that make sense to both your crew and the customer. Labor describes the work your team performs; materials identify supplies incorporated into or used for the project; outside services can cover work performed by another provider. Organizing by phase or room can make a larger estimate easier to read.
Be specific enough to distinguish preparation from installation and finishing. For example, removing an existing surface, preparing the substrate, and installing a new finish can require different resources. State whether cleanup and disposal are included, and identify any work that is outside your scope. Avoid a single vague line for an entire project when the details affect the agreement.
Clarify who selects, buys, receives, and stores materials. If the customer supplies an item, describe what your price covers and what happens if the item is unavailable or unsuitable. If your estimate includes an allowance for an unfinished selection, explain what it covers and how the final choice may change the price.
Quantities, units and prices
Give each line a useful description, a unit, a quantity, and a unit price. Depending on the work, a unit might be square feet, linear feet, an individual fixture, or a complete service. Multiply quantity by unit price and review the extended amount; then check the sum against the scope and your own cost calculations.
Fictitious example with illustrative values: a small room project lists wall preparation as 200 square feet at $2 per square foot, or $400; finish labor as 200 square feet at $3, or $600; and materials as one lot at $200. The illustrative total is $1,200 before any discount. These figures are an arithmetic example, not a market price or a substitute for measuring and pricing your own job.
Review waste, delivery, equipment, subcontractor charges, and other applicable costs as part of your own pricing process. Include only what belongs in the agreed scope and describe it clearly. If a quantity is provisional because a condition cannot yet be checked, identify the assumption and explain how you will agree on a revision.
Discounts, deposits and payment schedule
Show any agreed discount clearly and check how it affects the final total. The customer should be able to tell whether the discount applies to the entire proposal or to a specific item. Avoid leaving a different price in a message while the estimate shows an older amount; issue a revised document if the terms change.
When a deposit is part of the agreement, state its amount and when it is due. Set out the remaining payments by date or by a recognizable project milestone, such as completion of a defined phase. Check that the deposit and remaining installments add up to the final estimate total, and discuss the schedule before asking the customer to approve.
For the fictitious $1,200 example, an illustrative schedule could show a $400 deposit and two later payments of $400 each. Those amounts are only an example, not a recommended payment split. Choose terms that fit the project and your agreement, and consider any applicable local requirements.
Expiration date and notes
An expiration date tells the customer how long the offer is valid under the stated conditions. Choose a date that makes sense for your availability and the information used to price the job. If it passes before the customer accepts, review the scope, quantities, material availability, and terms before issuing an updated estimate.
Use notes for the assumptions that matter to this particular job: access, working hours, protection of adjacent areas, disposal, customer selections, and work excluded from the price. Identify dependencies such as a cleared room or a selected finish. If a concealed condition could change the work, explain that you will discuss the necessary revision before proceeding.
Write conditions in plain language and place them where the customer can find them. Review names, job address, item descriptions, totals, and payment terms for consistency. The goal is a document that both sides can use to discuss the same scope, rather than a collection of unexplained shorthand.
Send it and track approval
Send the estimate through the channel you agreed on with the customer. Include a short message identifying the project, the expiration date, and how to ask questions. Invite the customer to review the scope and payment schedule as well as the total. A PDF gives them a document to keep, while an approval link lets them review and approve from their phone.
Follow up to confirm receipt and ask whether any item needs clarification. If the customer changes the scope, update affected quantities, prices, notes, and payment terms, then send the revised version for approval. Keep track of which version was sent so the crew and customer are discussing the same work.
Use Obrix at my.useobrix.app to create an estimate and share it for customer approval. Start your free 14-day trial, no credit card. After approval, confirm the practical arrangements for starting the job, including access and any agreed deposit.
Writing it in Obrix (walkthrough)
In Obrix, begin with the customer and project information, then enter the lines from your site notes. Add clear descriptions, units, quantities, and prices for labor, materials, and any outside services. Review the calculations and add the agreed payment schedule, expiration date, and project-specific observations before sharing the estimate.
For the fictitious room example, enter preparation, finish labor, and materials as separate lines using the illustrative quantities and values above. Note who supplies the finish and what preparation is included. Check that the $1,200 total and the illustrative payment schedule agree, then review the document as a customer would before sending it.
Open the generated PDF to check readability and confirm that the proposal matches your discussion. Share the estimate and follow its approval, updating the proposal if the customer requests a change. For another way to organize the document, see the construction estimate template guide; the estimate vs invoice guide explains what each document is for.
Create your own estimate at my.useobrix.app. Start your free 14-day trial, no credit card. Your actual scope, quantities, prices, and terms should come from your own job assessment and agreement.
FAQ
Should I separate labor and materials?
Separate lines can make responsibilities and pricing easier to understand, especially if the customer supplies some materials. Describe the work and supplies in a way that reflects the agreement, and make any exclusions visible.
What if I discover extra work after sending the estimate?
Discuss the condition and proposed change with the customer. Update the affected scope and price, identify the revised version, and obtain approval before undertaking the additional work. Keep the original version available for reference.
Is an estimate the same as an invoice?
An estimate presents proposed work and terms for the customer to consider. An invoice requests payment for an amount due. Check the estimate vs invoice guide for a fuller explanation and use the document appropriate to the stage of the job.
How detailed should an estimate be?
Include enough detail to identify the work, quantities, responsibilities, price, payment terms, and relevant exclusions. The right level depends on the job: a complex renovation needs a clearer breakdown than a small, well-defined task.